Alternator Synchronous Generator And Types of Alternators

Alternator Synchronous Generator And Types of Alternators

An alternator is defined as a machine which converts mechanical energy to electrical energy in the form of alternating current (at a specific voltage and frequency). Alternators are also known as synchronous generators.

Use of Alternator

The power for the electrical system of a modern vehicle gets produced from an alternator. In previous days, we used DC generators or dynamos for this purpose, but after the development of alternator, we replaced the DC dynamos by more robust and lightweight alternator. Although the electrical system of motor vehicles requires direct current, still an alternator along with diode rectifier instead of a DC generator is a better choice as the complicated commutation is absent in alternator. This particular type of generator used in the vehicle is known as an automotive alternator (learn how an alternator is constructed).
Another use of alternators is in diesel-electric locomotive. The engine of this locomotive is nothing but an alternator, driven by a diesel engine. The alternating current produced by this generator is converted to DC by integrated silicon diode rectifiers to feed all the DC traction motors. These DC traction motors drive the wheel of the locomotive.
We also use this machine in marine similar to a diesel-electric locomotive. We specially design the synchronous generator used in marine and navy with appropriate adaptations to the salt-water environment. The typical output level of a marine alternator is about 12 or 24 volt. In big marine sheep, more than one units are used to provide massive power. In this marine system, the energy produced by the alternator is first rectified then used for charging the engine starter battery and auxiliary supply battery of marine.
One of the primary uses of alternators is in the production of bulk ac power for commercial purposes. In thermal power plants, in hydel power plants, even in nuclear power plants, alternators only converts mechanical energy to electrical energy for supplying to the power system.

Types of Alternators

Alternators or synchronous generators can be classified in many ways depending upon their applications and designs.
The five different types of alternators include:
  • Automotive alternators – used in modern automobiles.
  • Diesel-electric locomotive alternators – used in diesel electric multiple units.
  • Marine alternators – used in marine applications.
  • Brushless alternators – used in electrical power generation plants as the main source of power.
  • Radio alternators – used for low band radio frequency transmission.
Types Of Alternators
We can categorize these AC generators (alternators) in many ways, but the two main categories depending on their design are:
  1. Salient Pole Type
  2. Smooth Cylindrical Type

Salient Pole Type

We use it as low and medium speed alternator. It has a large number of projecting poles having their cores bolted or dovetailed onto a heavy magnetic wheel of cast iron or steel of good magnetic quality.
Such generators get characterized by their large diameters and short axial lengths. These generators look like a big wheel. These are mainly used for low-speed turbine such as in hydel power plant.

Smooth Cylindrical Type

We use it for a steam turbine driven alternator. The rotor of this generator rotates at very high speed. The rotor consists of a smooth solid forged steel cylinder having certain numbers of slots milled out at intervals along the outer periphery for accommodating field coils.
These rotors are designed mostly for 2 poles or 4 poles turbo generator running at 36000 rpm or 1800 rpm respectively.

History of Alternator

Michael Faraday and Hippolyte Pixii gave the very first concept of alternator. Michael Faraday designed a rotating rectangular turn of conductor inside a magnetic field to produce alternating current in the external static circuit. After that in the year of 1886 J.E.H. Gordon, designed and produced first prototype of useful model. After that, Lord Kelvin and Sebastian Ferranti designed a model of 100 to 300 Hz synchronous generator. Nikola Tesla in 1891, designed a commercially useful 15 KHz generator. After this year, poly phase alternators came into picture which can deliver currents to multiple phases.

Comments

Post a Comment

Popular posts from this blog

SAFETY VALVE FLOATING

SAFETY VALVE FLOATING PROCEDURE FOR SAFETY VALVE FLOATING 1.0 OBJECTIVE The objective of this procedure is to outline the general procedures involved in setting the safety valves to the designed set pressure before allowing the boiler to go for commercial operation. Follow the vendor’s manual for adjustment of set pressure. 2.0 PRE-REQUISITES Ensure proper mounting of the safety valve exhaust pipe, such that no load is coming to the safety valves. Check the drip pan assembly and its drains are as per the requirements. Follow the instructions of the vendor for safety valve exhaust piping and its support. 3.0 PROCEDURE 3.1 Normally the highest set pressure valve is the valve floated first. While setting this valve other safety valve is gagged. Start the boiler as per cold start-up the procedure by modulating the firing. When the drum pressure reaches about 75% of operating pressure gently tighten gage on other safety valves. Raise pressure slowly by throttling the startup ...
Read more

Steam Condenser of Turbine

Steam Condenser of Turbine Steam condenser is a device in which the exhaust steam from steam turbine is condensed by means of cooling water. The main purpose of a steam condenser in turbine is to maintain a low back pressure on the exhaust side of the steam turbine . After releasing from nozzles, the steam has to expand to a great extent for converting available energy into it to usable mechanical work. So, if the steam after doing its, work, does not get condensed, it will not give required space to other steam behind it, to expand to its required volume. Condensation of steam in a closed system, creates an empty place by reduction of volume of the low pressure steam. It is found that, 1 Kg of dry steam at 1.033 kg/cm 2 absolute pressure has a volume of 1.673 m 3 when it is condensed into water at 100 o C in a steam condenser, its volume becomes 0.001044 m 3 . The volume of steam would be thus 1/1644 parts of the space inside the vessel, and the pressure would fall to 0.2...
Read more

Rankine Cycle

Image
Rankine Cycle Ideal Rankine Cycle Principles of thermodynamics are useful for power cycle for of electrical power generation (i.e net power output) and to study refrigeration & heat pump which requires input of net power. Classification of thermodynamics power cycles can be done into two types: Vapor cycle working fluid exists in liquid phase during one part of the cycle (i.e from condenser outlet to Boiler) and mixed phase wit in the steam boiler and in vapor phase at the Boiler outlet. Gas cycle working fluid during the cycle remains in gas phase. Steam power generation units run on vapor power cycle using water as the working fluid. Under this section attempt is made to familiarize the readers with the concepts of ideal vapor cycle called Rankine cycle . Typical Power Plant Cycle Electrical power is generated by using vapor cycle power plants by using Coal, Lignite, Diesel, Heavy furnace oil as fuel depending upon the availability and cost. The flow s...
Read more